The Double Manual Swing Gate is manufactured in Britain, and is available in a variety of widths, from 6 - 12 meters. The gates are supplied with two lockable opening catch post for added safety (padlock not supplied). Height from ground to top of gate is 1100mm. Gates will be supplied hot dip galvanised and optional painted finish in a standard range of RAL colours is available.

Upright posts are available in surface mounted and root fixed options. (Surface Mounted option up to 5 meter width only recommended, for widths greater than 5 meters, Root Fixed option is advisable.)

Gates can be supplied Hot Dip Galvanised AND painted, however this will add 1 week to the lead time specified.

Specification

Gate Size: 50 x 50 x 3mm Steel Box Section
Upright Post: 80 x 80 x 5mm Steel Box Section
Latch Post: 80 x 80 x 5mm Steel Box Section
Catch Post: 50 x 50 x 3mm Steel Box Section

Root Fixed: 600mm below ground

Finish: Hot Dip Galvanised BSEN ISO 1461:2009, or Zinc treated and Powdercoated in a range of colours

Installation

Surface mounted option available up to 5m width. Greater than 5m width - Root Fixed option is preferable

For both surface mounted and root fixed options, a concrete base is advisable.

Root Fixed - Recommended size for the concrete foundation is 700x700x700mm deep as a minimum for main posts. Opening Latch Post foundation should be a 300mm cube.

Surface Fixed - Main post requires 4 no 16mm bolts for the two upright posts (fixing bolts not supplied). The base size is 400x400x10mm. Catch post requires 4 no 12mm bolts

• Opening latch post - strongly recommended as a safety measure for the swing gate.
• This product is supplied as Hot Dip Galvanised to BS EN ISO 9001:2015, or zinc treated and Powdercoated. If both Powdercoated and Galvanised option is required, this will have an additional cost and will extend the lead time. Please contact a member of the sales team if both options are required, as this will be quoted separately.
• Please note that this product is not suitable for marine environments unless Galvanised and Powercoated option is selected.
• Bespoke sizes are available and will be made to order. Please contact us for a quote for any bespoke size. We can manufacture extra tall height restriction barriers suitable for construction sites and quarries etc.
• Please note that if no bespoke size is selected, the height barrier will be made to the standard size selected.